Compare specifications and inspect their sources. · Who runs this site

Implant and surgical motors

Motors made for implant placement and oral surgery, usually run from a foot control with an irrigation pump and high torque at low speed.

Compared on: Stated torque · Torque Range (Ncm) · Stated motor speed · Irrigation Flow (ml/min) · Max Torque (via 20:1) · Motor weight · Reduction Ratio

Filters

8 of 16 published implant and surgical motors match. Tick two or three to compare them side by side.

  • EXPERTsurg LUX

    KaVo

    • Electric
    • Brushless
    • System: motor with control unit
    Stated torque
    5.5 N·cm (0 -12 000 U / min)
    Stated motor speed
    0–40,000 rpm
    Irrigation flow (ml/min)
    -
  • MASTERsurg LUX Wireless

    KaVo

    • Electric
    • Brushless
    • System: motor with control unit
    Stated torque
    80 N·cm (at the instrument)
    Stated motor speed
    0–40,000 rpm
    Irrigation flow (ml/min)
    110 ml / min
  • Surgic Pro2

    NSK

    • Electric
    • System: motor with control unit
    Stated torque
    -
    Stated motor speed
    -
    Irrigation flow (ml/min)
    -
  • Implantmed Plus

    W&H

    • Electric
    • System: motor with control unit
    Stated torque
    6.2 N·cm (at motor)
    Stated motor speed
    200–40,000 rpm (at motor)
    Irrigation flow (ml/min)
    90 ml/min
  • SI-923

    W&H

    • Electric
    • System: motor with control unit
    Stated torque
    5.5 N·cm
    Stated motor speed
    300–40,000 rpm
    Irrigation flow (ml/min)
    90 ml/min (at 100%)
  • SI-2100

    W&H

    • Electric
    • System: motor with control unit
    Stated torque
    6.2 N·cm
    Stated motor speed
    200–40,000 rpm
    Irrigation flow (ml/min)
    90 ml/min (at 100%)
  • SI-2101

    W&H

    • Electric
    • System: motor with control unit
    Stated torque
    6.2 N·cm (at motor)
    Stated motor speed
    200–40,000 rpm (on the motor)
    Irrigation flow (ml/min)
    90 ml/min (at 100%)
  • SI-2102

    W&H

    • Electric
    • System: motor with control unit
    Stated torque
    6.2 N·cm (at motor)
    Stated motor speed
    200–40,000 rpm (on the motor)
    Irrigation flow (ml/min)
    90 ml/min (at least; at 100%)

1 of 3 selected — add one more to compare